杜邦特氟龙涂料Teflon涂料最新型号列表

TEFLON® PTFE Coatings

PTFE (polytetrafluoroethylene) nonstick coatings are two-coat (primer/topcoat) systems. These products have the highest operating temperature of any fluoropolymer (260°C/500°F), an extremely low coefficient of friction, good abrasion resistance, and good chemical resistance. TEFLON® PTFE is available only in water-based liquid form.

• TEFLON® 850G-314 - PTFE Liquid Primer / One Coat (2 Part) - Green

• TEFLON® 850G-321 - PTFE Liquid Primer / One Coat (2 Part) - Grey

• TEFLON® 850G-204 - PTFE Liquid Primer / One Coat (Premixed) - Green

• TEFLON® 851G-214 - PTFE Liquid Topcoat - Green

• TEFLON® 851G-221 - PTFE Liquid Topcoat - Grey

• TEFLON® 851G-224 - PTFE High Build Liquid Topcoat - Green

• TEFLON® 851G-255 - PTFE High Build Liquid Topcoat - Black

• TEFLON® 852G-201 - PTFE Liquid Topcoat - Clear

• TEFLON® 852G-202 - PTFE High Build Liquid Topcoat - Clear       

                       


TEFLON® FEP Coatings

FEP (fluorinated ethylene propylene copolymer) nonstick coatings melt and flow during baking to provide nonporous films. These coatings provide excellent chemical resistance. In addition to low friction, TEFLON® FEP coatings have excellent nonstick properties. Maximum use temperature is 204°C/400°F. TEFLON® FEP is available in water-based liquid and powder forms.

• TEFLON® 532G-8110 - FEP Powder Topcoat - Clear

• TEFLON® 856G-200 - FEP Liquid Topcoat - Clear

• TEFLON® 856G-204 - FEP Liquid Topcoat - Green
 



TEFLON® PFA Coatings
 

Like FEP, PFA (perfluoroalkoxy) nonstick coatings melt and flow during baking to provide nonporous films. TEFLON® PFA offers the additional benefits of higher continuous use temperature (260°C/500°F), film thicknesses up to 1,000 micrometers (40 mils), and greater toughness than TEFLON® PTFE or TEFLON® FEP. This combination of properties makes TEFLON® PFA an excellent choice for a wide variety of uses, especially those involving chemical resistance. TEFLON® PFA is available in both water-based liquid and powder forms.

 

• TEFLON® MJ-501 - PFA High Build Powder Topcoat - Tan

• TEFLON® 532G-5010 - PFA Powder Topcoat - Clear

• TEFLON® 532G-5011 - PFA Fine Particle Size Powder Topcoat - Clear

• TEFLON® 532G-5310 - PFA High Molecular Weight Powder Topcoat - Clear

• TEFLON® 532G-7000 - PFA Powder Topcoat - Sparkling Clear

• TEFLON® 532G-7410 - PFA High Molecular Weight Powder Topcoat - Clear

• TEFLON® 532G-13032 - PFA Reinforced Powder Topcoat - Grey

• TEFLON® 532G-13054 - PFA Permeation Resistant Powder Topcoat - Ruby Red

• TEFLON® 858G-210 - PFA High Build Liquid Topcoat - Clear

• TEFLON® 858G-917 - PFA Permeation Resistant Liquid Topcoat - Ruby Red

TEFLON® ETFE Coatings

ETFE is a copolymer of ethylene and tetrafluoroethylene and is also sold under the TEFZEL® trademark. Although not fully fluorinated, ETFE has excellent chemical resistance and can operate continuously at 149°C/300°F. This resin is the toughest of the fluoropolymers and can be applied at film builds up to 1,000 micrometers (40 mils) to provide a highly durable finish. TEFLON® ETFE is available in powder form.

 

• TEFLON® 532-6118 - ETFE Permeation Resistant Powder Topcoat - Beige

• TEFLON® 532-6200 - ETFE Ultrasmooth Powder Topcoat - White

• TEFLON® 532-6210 - ETFE Ultrasmooth Powder Topcoat - Clear

• TEFLON® 532-6310 - ETFE High Build Powder Topcoat - Clear

• TEFLON® 532-6314 - ETFE High Build Powder Topcoat - Green

• TEFLON® 699-205 - ETFE Permeation Resistant Liquid Topcoat - Pearl

TEFLON® One Coat Systems

These solvent-based liquid coatings are formulated with special blends of fluoropolymers and other high-performance resins to improve toughness and abrasion resistance. Because the film components stratify during baking, most of the fluoropolymer properties (such as low friction and nonstick character) are retained. The resins provide adhesion and abrasion resistance. These products can sometimes be applied to smooth, clean metal. Bake requirements vary, depending on the specific coating from 325F to 600F.

• TEFLON® 420G-104 - PTFE Liquid FDA One Coat - Gray

• TEFLON® 420G-109 - PTFE Liquid FDA One Coat - Sparkling Black

• TEFLON® 532-1003 - FEP Powder One Coat - Black

• TEFLON® 856G-114 - FEP Liquid One Coat Conductive - Green

• TEFLON® 954G-300 - FEP Liquid One Coat - Clear

• TEFLON® 954G-303 - FEP Liquid One Coat - Black

• TEFLON® 954G-304 - FEP Liquid One Coat - Green

• TEFLON® 958G-303 - PTFE Liquid One Coat - Black

• TEFLON® 958G-313 - PTFE Reinforced Liquid One Coat - Black

• TEFLON® 958G-406 - PTFE Reinforced Liquid One Coat - Black

• TEFLON® 958G-414 - PTFE Reinforced Liquid One Coat - Green

• TEFLON® 959G-203  - FEP Liquid One Coat - Black

• TEFLON® 959G-203  - FEP Liquid One Coat - Brown

• TEFLON® 959G-204 - FEP LiquidOne Coat - Green

  

TEFLON® Specialty Systems

These aqueous-based dispersions are specially blended multi-coat systems of TEFLON® PTFE (polytetrafluoroethylene), TEFLON® FEP (fluorinated ethylene propylene copolymer), and TEFLON® PFA (perfluoroalkoxy) to optimize performance characteristics through material synergy. Formulations are available with internal reinforcement materials in the coating matrix to increase abrasion resistance and extend service life.

 

• TEFLON® 857G-030 - Liquid Primer - Black

• TEFLON® 857G-230 - Liquid Topcoat - Black

• TEFLON® 855G-021 - Liquid Primer - Blue

• TEFLON® 857G-130 - Liquid Midcoat - Pewter

• TEFLON® 857G-135 - Liquid Midcoat - Black

• TEFLON® 857G -240 - Liquid Topcoat - Clear

• TEFLON® 857G-040 - Liquid Primer - Black

• TEFLON® 857G-140 - Liquid Primer - Black

• TEFLON® 857G-240 - Liquid Topcoat - Clear

• TEFLON® 953G-401 - FEP Liquid Topcoat - Clear

• TEFLON® 953G-506 - FEP Liquid Primer - Violet