Product Description 

Stoner® A500 Citrus Cleaner for Mold is an all natural, heavy-duty, precision cleaner used to remove greases, oils, waxes, silicones and other contaminants from molds, metals, painted surface, ceramic, berglass and other materials. 

Citrus Cleaner for Mold is made from a highly re ned extract of citrus fruits which are more healthy and environmentally friendly than petroleum distillates. With this powerful formula, Citrus Cleaner for Mold can remove the greasy, grimy soils and stains that soap and water can’t. 

A500 Citrus Cleaner for Mold ADVANTAGES: 

•   Powerful formula - cleans fast and saves time. 


•   Pleasant citrus scent. 


•   Cleans molds -in or out of the press. 


•   Fast drying. 


•   Contains no Class I (CFC) or Class II (HCFC) Ozone Depleting Substances. 


•  Contains no chlorinated solvents. 


Uses 


Stoner® A500 Citrus Cleaner for Mold is an all natural, heavy-duty, precision cleaner used as a degreaser in the plastics and rubber molding industries. 


Many applications in the automotive, aerospace and general fabrication industries. For use in the manufacturing process only. Not for use as a general purpose cleaner or degreaser. 

Direction for Use 

Recommended Procedure 

Shake well. ALWAYS HOLD CAN UPRIGHT WHEN SPRAYING. Hold can 10 to 12 inches from surface. Apply as needed to loosen and ush away contaminants from molds. Dif cult areas may require second application or scrubbing with brush or cloth. Always test before using. 

Storage and Handling 

Do not puncture or incinerate container. Do not expose container to heat or store at temperatures above 120 °F. Keep container away from and do not use near sparks, open ame, heated surfaces, or other ignition sources. 

Packaging 

Stoner® A500 Citrus Cleaner for Mold is available in: 

• 12-can case of 12 oz cans    Part # A500CSSTON02

• 5-gallon pail
                Part # B500PL

• 55-gallon drum              Part # B500DR

产品描述

用于模具的Stoner®A500柑橘清洁剂是一种全天然，重型，精密清洁剂，用于去除模具，金属，油漆表面，陶瓷，玻璃和其他材料上的油脂，油，蜡，有机硅和其他污染物。

用于模具的柑橘清洁剂由高度精炼的柑橘类水果提取物制成，比石油馏分更健康，更环保。有了这个强大的配方，柑橘清洁剂模具可以去除肥皂和水不能够的油腻，肮脏的土壤和污渍。

A500用于模具的柑橘清洁剂优点：

•强大的配方 - 快速清洁并节省时间。

•令人愉快的柑橘气味。

•清洁模具 - 在印刷机内或外面。

•快干。

•不包含I类（CFC）或II类（HCFC）消耗臭氧层物质。

•不含氯化溶剂。

用途

用于模具的Stoner®A500柑橘清洁剂是一种全天然，重型，精密清洁剂，用作塑料和橡胶模塑行业的脱脂剂。

在汽车，航空航天和一般制造行业有很多应用。仅用于制造过程。不可用作通用清洁剂或脱脂剂。

使用指南

推荐程序

摇匀。喷涂时应始终保持直立状态。保持距离地面10到12英寸。根据需要使用，以松开和清除模具中的污染物。不同的区域可能需要第二次使用或用刷子或布擦洗。使用前请始终测试。

存储和处理

不要刺穿或焚烧容器。不要将容器暴露在高温或高于120°F的温度下储存。请远离容器，并且不要在火花附近，开放的火焰，受热的表面或其他火源。

打包

用于模具的Stoner®A500柑橘清洁剂适用于：

•12罐12盎司罐    型号 #A500CSSTON02

•5加仑桶          型号 ＃B500PL

•55加仑桶装       型号＃B500DR

 

Stoner® A500 Citrus Cleaner for Molds is an all natural, heavy-duty, precision cleaner used to remove greases, oils, waxes, silicones and other contaminants from molds, metals, painted surface, ceramic, fiberglass and other materials.  Citrus Cleaner for Mold is made from a highly refined extract of citrus fruits which are more healthy and environmentally friendly than petroleum distillates. With this powerful formula, Citrus Cleaner for Mold can remove the greasy, grimy soils and stains that soap and water can’t.

 

A500 Citrus Cleaner for Mold ADVANTAGES:

• Powerful formula - cleans fast and saves time
• Pleasant citrus scent
• Cleans molds -in or out of the press
•  Fast drying
• Contains no Class I (CFC) or Class II (HCFC) Ozone Depleting Substances
• Contains no chlorinated solvents