G484 RR-1381 WB Mold Release-RR-1381水性半永久橡胶脱模剂

G484

RR-1381 WB Mold Release

RR 1381 WB Semi-Permanent Release System is a silicone resin emulsion, semi-permanent release. RR-1381 WB gives outstanding results in very tough release applications. Applied to a clean mold, it forms a smooth, continuous film with good adhesion to the mold surface. (Not for silicone rubber application).

Benefits:

Multiple releases gives increased productivity
No transfer post-finishing problems virtually eliminated
No knit lines, cracks, or splits low scrap rate
Very low build-up more production time between mold cleanings
No VOC's or ODC's present carrier is water only

G484

RR-1381 WB脱模剂

RR 1381 WB半永久性脱模剂系统是一种硅树脂乳液，半永久性脱模剂。 RR-1381 WB在非常严格的发布应用中提供了出色的结果。应用于干净的模具，形成一个光滑，连续的薄膜，对模具表面具有良好的附着力。（不适用于硅橡胶应用）。

优点：

多次脱模可提高生产力

没有传输后期处理问题几乎消除

没有针织线，裂缝或分裂低废品率

模具清洁之间的生产时间非常短

没有VOC或ODC的现有载体仅为水

021-56830399

G484

RR-1381 WB Mold Release