A373

Fluoroelastomer Mold Release

Stoner® A373 Fluoroelastomer™ Mold Release is a semi-permanent, fast curing release for fluorels, vitons and other fluorocarbons.  A373 is specially formulated as a long lasting, non-transferring release agent and anti-stick mold coating for molded fluoroelastomers and similar materials. Provides a permanent yet removable, thin-layer, anti-stick mold surface coating for fast, easy part removal from molds. A single application will allow multiple molding cycles. When the mold eventually begins to stick, often the sticking area alone can be “touched-up” quickly and allow continued molding with minimal production delay. Improves molding efficiency in many processes including injection, compression, and transfer molding.

A373 ADVANTAGES:

• Saves time – lets parts remove quickly and easily from molds
• Boosts productivity - allows multiple releases per single application
• Fluoroelastomer mold release coating won’t transfer to fluoroelastomer compound or interfere with delicate compound chemistry
• Improves part appearance and reduces defects caused by sticking
• Contains no CFC or HCFC (Class I or Class II) propellants or solvents
• Contains no chlorinated solvents such as 1,1,1 trichloroethane or methylene chloride

Stoner® A373 氟弹性体脱模剂是一种半永久性，快速固化的脱模剂，用于Fluorels，氟橡胶和其他碳氟化合物。A373特别配方为用于模塑含氟弹性体和类似材料，產生持久的效果，快速，轻松地从模具中脱模。单次应用将產生多次模制周期。当模具最终开始粘附时，通常粘附区域可以单独快速地“接触”，并允许以最小的生产延迟继续模制。提高了许多工艺（包括注塑，压缩和传递模塑）的成型效率。

 

A373 优点：

• 节省时间 - 让零件快速，轻松地从模具中取出
• 提高生产力 - 允许每次应用将產生多次模制周期
• 含氟弹性体脱模涂层不会转移到含氟弹性体化合物或干扰复杂的化学品
• 改善部件外观，减少因粘贴造成的缺陷
• 不含CFC或HCFC（I类或II类）推进剂或溶剂
• 不含氯化溶剂，如1,1,1-三氯乙烷或二氯甲烷