P229 Polylso Release-水性非凝胶聚异氰酸酯脱模剂
P229P229 Polylso ReleaseStoner® P229 PolyIso™ Release is an extremely cost effective concentrated silicone and water emulsion that has proven to easily release polymer concrete, centrifugal cast FRP, and male or female molded non gel coated polyester or epoxy based composites that do not require any post painting.
P229 PolyIso™ Release ADVANTAGES:
Water based emulsion that can be further reduced with water, achieving very low application costs. Easiest release for non-gel coated products such as polymer concrete (pipe, utility boxes, manways), epoxy pipe, fittings, domes, tanks, etc. P229P229 Polylso Release浓缩配方，离型聚异氰酸酯，可稀释的配方消除边缘修剪的需要。非易燃。简单地在侧板或模具表面上塗上脫模劑，让部件快速轻松地脱模。防止黏著，你可稳定地造出更多高品质的部件。最好应用是喷一層薄涂层。该产品含有沉淀的材料。建议使用前和使用过程中搅拌。最好应用是通过使用喷雾系统施工，做出一層薄涂层。 |
如聚合物混凝土（管道，公用工程箱，人行通道），环氧树脂管，配件，圆顶，罐等）最容易脱模。