E455

Thermoset Mold Release

Stoner® E455 Thermoset Mold Release is specially formulated as release agent and anti-stick lubricant for compression molded reinforced thermosets.  It allows molded parts to be painted, plated, hot stamped, adhesive bonded, labeled, or otherwise decorated.  E455 Thermoset Mold Release contains no silicones or oils.  It eliminates the need for paste or block wax releases. Because E455 provides a long lasting anti-stick film for fast, easy part removal from molds you should get multiple part releases per application.  Used extensively in composites R&D labs.

E455 Thermoset Mold Release improves molding efficiency in many processes including injection, compression, vacuum form, and pour cast molding.

E455 Thermoset Mold Release ADVANTAGES:

• Saves time - lets parts release quickly and easily from molds.
• Allows molded parts to be painted, hotstamped, or otherwise decorated.
• Improves part appearance and reduces defects caused by sticking.
• Formulated to provide high levels of user and environmental safety.
• Contains no Class I or Class II Ozone Depleting Substances.
• Contains no chlorofluorocarbon (CFC) or hydrochlor-ofluorocarbon (HCFC) propellants or solvents such as HCFC 141b or HCFC 142b.
• Contains no chlorinated solvents such as 1,1,1 trichloroethane or methylene chloride.
• Contains no silicones or oils

Stoner® E455 热固性模具脱模剂专门用作压塑成型、增强热固性材料。它讓模制部件被涂漆，电镀，热冲压，粘合剂粘合，标记或以其他方式装饰。 E455 热固性脱模剂不含硅氧烷或油。它减少粘贴或块蜡离型的需要。因为 E455 提供了持久的防粘膜，快速，方便地从模具中脱模，所以每次应用都应该获得多个部件的脱模。广泛应用于复合材料製作上。

 

E455 热固性模具脱模剂在许多工艺（包括注塑，压缩，真空成型和浇注成型）中提高了成型效率。

E455 热固性模具脱模剂优点：

• 节省时间 - 让零件快速，轻松地从模具中脱模
• 允许模制零件涂漆，烫金或其他装饰
• 改善部件外观，减少因粘贴造成的缺陷
•  對用户和环境安全
• 不含I类或II类臭氧消耗物质
• 不含氯氟烃（CFC）或氢氯氟烃（HCFC）推进剂或溶剂，如HCFC 141b或HCFC 142b
• 不含氯化溶剂，如1,1,1-三氯乙烷或二氯甲烷
• 不含硅氧烷或油