TRA4000

TraSys® 4000 RotoFlow™

TraSys® 4000 RotoFlow™ is a mold coating that facilitates the flow of polyolefin and nylon resin into hard-to-fill areas of rotational molds.  RotoFlow™ helps fill in voids around inserts, tight radii, threads, and deep cavities.  RotoFlow™ removes pinholes on the surface of rotomolded polyolefin and nylon parts.  It reduces bridging, thinning, blowholes, and static lines.

TraSys® 4000 RotoFlow™ ADVANTAGES:

• Improves the quality and consistency of rotomolded polyolefin and nylon parts.
• Removes pinholes, voids, and blow outs.
• Improves the appearance and operational performance of threads.
• Increases the strength of inserts.
• Reduces scrap and increases productivity.
• Contains no Class I or Class II ozone depleting substances.
• Contains no CFC or HCFC propellants or solvents.
• Contains no chlorinated solvents such as 1,1,1 trichloroethane or methylene chloride

TraSys® 4000 RotoFlow™ 是一种模具涂层，有助于聚烯烃和尼龙树脂流入滚塑模具內难以填進的区域。RotoFlow™ 有助于填補空隙、紧密的半径、螺纹和深腔。RotoFlow™ 可去除滚塑聚烯烃和尼龙零件表面的针孔。它减少桥接，变薄，气孔和静态线。

 

 

TraSys® 4000 RotoFlow™ 优点：

• 提高了滚塑聚烯烃和尼龙部件的质量和一致性
• 去除针孔，空隙和吹出口
• 改善螺纹的外观和操作性能
• 提高刀片的强度
• 减少废品，提高生产率
• 不含I类或II类消耗臭氧物质
• 不含CFC或HCFC推进剂或溶剂
• 不含氯化溶剂，如1,1,1-三氯乙烷或二氯甲烷